LED Type: .25 Watt Surface Mounted Diode
Construction: Optical Grade Clear Acrylic
Panel Thickness: 0.31 in (8 mm)
Weight: 2 lbs (900g)/ft2
Operational Temp.: -22˚F min to 104˚F max
(-30˚C min to 40˚C max)
Estimated Lifespan: 50,000+ hours
Operating Voltage: 12 Volt DC
UL Listed: File E350056
Warranty: 5 Years (3 years for models sold in EMEA)
Power Consumption: 5W per ft
Coordination: Panels may be wired together in parallel, not series. Each panel must have direct connection to a power supply.
Wire Placement: The point of wire entry is customizable to accommodate your project’s tiling requirements. Please consult with your project specialist.
Dimming/Control: Rosco can provide a full suite of dimming and control accessories to complement your Custom LitePad.
Cord Length: Custom LitePad comes with a 4 ft (1.2 m) 4 core cable, 3 connections represent each of the single color LED’s for mixing and the fourth is a common ground.
Single Panel Size: Max: 47” W x 118” L (1.2 m x 3 m)
Min: 6” W x 6” L (152 mm x 152 mm)
Shaping: Custom LitePads can be factory cut into just about any shape imaginable. Also, they can be drilled or tooled anywhere across the interior surface within 1 inch of its edge.
Heat Control: An integral aluminum heat sink is mounted on the rear of the panel to disperse heat build-up, reducing the need for external cooling and prolonging service life.
Thin Film Reflector: Custom LitePads include a reflective, opaque white backing to maximize optical brightness and distribution of light.
IP Rating: IP61
IP65 available on request
Flammability Classification: 94HB
Smoke Density: (D2843) 4-10%
Deflection: Custom LitePad may bow if the panel area is too large. Broad sheets should be supported every 18 inches in any direction.
LED Positioning Options: LEDs can be positioned around any number of sides or the entire circumference.