Products on this page may not be available in your region.
Rosco LitePad was one the first LED solutions for image capture professionals and has been artfully illuminating scenes in television shows, photo shoots and feature films since 2006. As the LED technology inside has improved – so has LitePad.
LitePad HO90 is the same slim-profile, edge-lit LED source that filmmakers and photographers love to use for accent and fill lighting – now featuring a high CRI output. At only 0.3” (8mm) thick, LitePad HO90 is able to fit in places where conventional light sources will not. LitePad HO90 is daylight balanced (5300K), features High CRI (90+) emitters and produces a soft, flattering quality of light that is easy on the eyes. Available in six standard sizes, LitePad HO90 has LEDs on all four sides of the perimeter for maximum brightness, while an interior connector provides a solid power connection directly on the LitePad itself. LitePad HO90 is the perfect solution for lighting nighttime car interiors, product photography, interviews or any situation that needs extra illumination, but there’s no space for a traditional fixture.
LitePad HO90 is only one 0.3 inches (8mm) thick, making it one of the thinnest light fixtures in the world. Its slim profile allows the LitePad to be mounted and hidden in places conventional light fixture could not. No thicker than a pad of paper, LitePads can easily fit into a back pack or messenger bag for easy transportation.
One of the most important attributes of LitePad HO90 is the quality of light it produces. LitePad creates a soft, flattering beam of light – perfect for filling in shadows, creating "beauty" light or to mimic a practical light in the shot. LitePad has been hailed as the perfect "get me out of trouble" light because little needs to be done when using LitePad in order to make it produce beautiful light.
Manufactured using the latest, high CRI emitters, LitePad HO90 creates clean, attractive light output. The HO90 LEDs drastically minimize the green spike while also producing more red content – which equals better skin tones and makes them easier to balance with other lights in the shot.
Because LitePad HO90 is an LED light source, the amount of heat generated is very low. In the center of the LitePad, the unit is completely cool to the touch, while the edges, where the LEDs are located, are only slightly warm. This means that LitePads can be left on all day in a small set without making the room unbearable to work in.
Weighing significantly less than a convention light source, LitePad HO90 is capable of being mounted in many different ways and places. Whether it be Rosco's mounting brackets, Velcro, or even rubber bands, LitePad's low weight makes it incredibly easy to mount and makes carrying a few of them around a breeze.
With each LED only consuming a quarter of a watt, LitePad H090 is an extremely energy efficient light source. Several LitePads can easily run off of available household power and their low power consumption allows them to run for hours on any 12v battery source.
Unlike many LED sources, LitePad is a bounced LED light - not an array of LEDs pointing directly forward. Performers or technicians can look directly into LitePad without squinting, hurting their eyes or getting a headache.
LitePad HO90 is fully dimmable using our proprietary Single Fader Dimmer and 2 CH/DMX Dimmer. These dimmers feature pulse width modulation that smoothly dim any LitePad HO90 in the range – flicker-free and with no color temperature change. With LitePad's dimmers, you are able to set the exact light intensity you need.
LitePad HO90 features an interior connector that eliminates the hard-wired cable, which had the potential to be pulled out during use. This feature was introduced, based on user feedback of previous versions of LitePad, and makes the product more rugged and easier to use.
In The Box
LitePad HO90
Transformer
Right Angle Extension Cable
Dimensions & Weights
|
Width |
Length |
Depth |
Weight |
|
|
3" Circle |
3.0" Diameter |
|
0.37" |
0.10 lbs. |
|
3" x 6" |
3.0" |
6.0" |
0.37" |
0.30 lbs. |
|
3" x 12" |
3.0" |
12.0" |
0.37" |
0.55 lbs. |
|
6" x 6" |
6.0" |
6.0" |
0.37" |
0.55 lbs. |
|
6" x 12" |
6.0" |
12.0" |
0.37 |
1.10 lbs. |
|
12" x 12" |
12.0" |
12.0" |
0.37" |
2.15 lbs. |
Light Output
|
Units |
12" |
18" |
24" |
36" |
48" |
|
|
3" Circle |
FC |
21 |
9 |
5.3 |
2.5 |
1.5 |
|
LUX |
230 |
100 |
57 |
26 |
16 |
|
|
3" x 6" |
FC |
50 |
23 |
13 |
6 |
3.5 |
|
LUX |
520 |
240 |
140 |
65 |
37 |
|
|
3" x 12" |
FC |
70 |
37 |
21 |
10 |
5.6 |
|
LUX |
800 |
400 |
230 |
110 |
60 |
|
|
6" x 6" |
FC |
70 |
34 |
18 |
8.5 |
5 |
|
LUX |
740 |
370 |
200 |
90 |
53 |
|
|
6" x 12" |
FC |
120 |
60 |
34 |
16 |
9 |
|
LUX |
1300 |
640 |
370 |
170 |
100 |
|
|
12" x 12" |
FC |
180 |
90 |
52 |
25 |
14 |
|
LUX |
1900 |
970 |
560 |
260 |
150 |
Power Consumption
|
Wattage |
Amps |
|
|
3" Circle |
3.25 |
0.27 |
|
3" x 6" |
6 |
0.5 |
|
3" x 12" |
9.75 |
0.81 |
|
6" x 6" |
7.75 |
0.65 |
|
6" x 12" |
12 |
1 |
|
12" x 12" |
16 |
1.33 |
Properties
Color Temperature: 5300K
CRI: 93
Lamp Life: 60,000 hrs
Operating Temperature: -30°C - +85°C
Power: 12V DC Input
Sizes - LitePad HO90 Daylight
290 90003 0120 - LitePad HO90 3" Circle Daylight
290 90306 0120 - LitePad HO90 3x6 Daylight
290 90312 0120 - LitePad HO90 3x12 Daylight
290 90606 0120 - LitePad HO90 6x6 Daylight
290 90612 0120 - LitePad HO90 6x12 Daylight
290 91212 0120 - LitePad HO90 12x12 Daylight
Rosco Minute - LitePad Single Fader Dimmer Video
Case Study: Nutcracker CLP
Please complete this form
|
|
Beam Control: Reduces Native 165° Spread to 127° Color: Black |
|
This compact thumb dimmer provides smooth, flicker-free dimming of any LitePad – with no color temperature change. The dimmer includes a digital display with on/off Thumb Wheel w/push-button toggle and magnets that attach the dimmer to metal C-Stands. |
|
Max. Load: 5 Amps (50 watts) Input: 12VDC/Output: 12VDC Control: Thumb Wheel |
|
This wall-mountable dimmer provides smooth, flicker-free dimming of any LitePad – with no color temperature change. The dimmer features a digital display and two manual, rotary thumb wheels with on/off, push-button toggle to control two LitePads, or two groups of LitePads. The unit also has 5-Pin DMX In & Out, which allows it to interface with a control console via two channels of DMX. |
|
Max. Load: 5 Amps (60 watts) Input: 12VDC/Output: 12VDC Control: Two Manual Rotary Thumb Wheels or Two Channels of DMX DMX 512 via 5-pin XLR |
|
This 1 Amp Transformer is designed to provide 12v DC power for most of the smaller LitePads. It has a one amp maximum, which limits its usage to LitePads that draw less than one amp, including the 3" Circle HO90, and the 3"x3", 3"x6" and 6"x6" sizes of LitePad HO90, Axiom and Axiom 90. |
|
Input: 100-240VAC Output: 12VDC 1 Amp |
|
This 3 Amp Transformer is designed to provide 12v DC power to any standard LitePad. Thanks to the low power consumption of Rosco LitePads, a number of fixtures can be ganged together onto one power supply using LitePad Y-Splitter and 4-Way Cable Splitters – as long as the maximum power consumption of the combined LitePads remains below three amps. |
|
Input: 100-240VAC Output: 12VDC 3 Amp |
|
This 5 Amp Transformer is designed to provide 12v DC power to any standard LitePad. Thanks to the low power consumption of Rosco LitePads, a number of fixtures can be ganged together onto one power supply using LitePad Y Splitter and 4-Way Cable Splitters – as long as the maximum power consumption of the combined LitePads remains below five amps. |
|
Input: 100-240VAC Output: 12VDC 5 Amp |
|
The LitePad AA Battery Holder is designed to provide 12v DC power to any standard LitePad. Thanks to the low power consumption of Rosco LitePads, eight AA batteries can power most fixtures for over an hour or more. Batteries not included. |
|
Input: 8 AA Batteries Output: 12VDC 2 Amp |
The LitePad D-Tap Power Adapter will enable the LitePad to plug directly into any power supply with a D-Tap connector, such as Anton/Bauer and V-Mount batteries.
Load: 12VDC 5A Max.
Connectors: Female 2.1mm x 5.5mm Barrel to Male Anton/Bauer
|
The 4-Pin Adapter will enable the LitePad to plug directly into any power supply with a 4-Pin (12VDC) XLR connector. |
|
Load: 12VDC 5 Amp Max. Connectors: Female 2.1mm x 5.5mm Barrel to Male 4-Pin XLR |
|
The Car Adapter plugs directly into any car cigarette lighter to provide 12v DC power for any standard LitePad. |
|
Input: 12VDC Output: 12VDC 3 Amp |
|
The 10ft Extension Cable enables the LitePad to be placed farther away from the transformer. |
|
Load: 12VDC 5 Amp Max. Length: 10 feet (3 meters) |
|
The 10ft Right Angle Extension Cable is designed for use with LitePad HO+, HO90, Axiom and Axiom 90. It enables the LitePad to be placed farther away from the transformer. |
|
12VDC 5 Amp Max. Length: 10 feet (3 meters) |
|
The Y Splitter allows for more than one LitePad to be plugged into a power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads. |
|
Load: 12VDC 5 Amp Max. Length: 12 Inches Connectors: 2.1mm x 5.5mm DC Barrel Connections: Two |
|
The 4-Way Splitter allows for up to four LitePads to be plugged into one power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads. |
|
12VDC 5 Amp Max. Length: 12 Inches Connectors: 2.1mm x 5.5mm DC Barrel Connections: Four |
Uses any V-lock batteries
Longer running time – 3+ hours on one pair
More efficient
Attaches to stand
|
This bracket is designed to hold 3" Circle, 3"x3", 3"x6" and 3"x12" LitePad DL, HO, HO+, and HO90 LED Fixtures. A 1/4 - 20 bolt on the back allows for attachment to any device with a 1/4 - 20 female receiver. |
|
Max. Load: 5 lbs. |
|
This bracket is designed to hold 3"x6" or 6"x6" LitePad DL, HO, HO+, and HO90 LED Fixtures. A 1/4 - 20 bolt on the back allows for attachment to any device with a 1/4 - 20 female receiver. |
|
Max. Load: 10 lbs. |
|
This bracket is designed to hold 6"x12" or 12"x12" LitePad DL, HO, HO+, and HO90 LED Fixtures . A 1/4 - 20 bolt on the back allows for attachment to any device with a 1/4 - 20 female receiver. |
|
Max. Load: 15 lbs. |
|
This compact, lightweight Light Stand can hold any Rosco LitePad using the proper mounting attachment. |
|
Configuration: Four Risers Collapsed Length: 19.2" (490mm) Max. Height: 89.3" (227cm) Footprint Diameter: 40.1" (102cm) Max. Load: 5.5 lbs. (2.5kg) Weight: 2.4lbs. (1.1kg) |
|
This ball-and-socket arm allows for precise positioning of all LitePads. |
|
Max. Load: 5.5 lbs. (2.5kg) Length: 8.75 inches (22.23cm) Connectors: Female 5/8th to Female 1/4-20 |
|
The LitePad Snake Arm is an 8" bendable arm capable of positioning smaller sized LitePads. |
|
Max. Load: 1.91 lbs. (865g) Length: 8 inches (20.32cm) Connectors: Female 1/4-20 to Female 1/4-20 |
|
This attachment allows for smaller LitePad LED fixtures to be attached to the cold shoe of the camera. (additional mounting hardware, such as LitePad 8" Snake Arm, required). |
|
Max. Load: 2 lbs. (907g) Connectors: Cold Shoe to 1/4-20 Male |
|
This adapter threads onto the 1/4-20 bolt found on LitePad mounting brackets, which allows them to attach to any 5/8" Baby Pin Receiver (ie. a C-Stand). |
|
Adapter: Female 1/4-20 to Male Baby Pin Length: 3.5 inches (8.9cm) Diameter: 5/8th inch Max. Load: 30 lbs. (13.6kg) |
A mobile way to stabilize your lighting setup
An innovative way to strap supporting weight to your LitePad Light Stands without sandbags
Insert your own filled water bottle into the holder & strap it to the light stand using the carabiner
|
A selection of Rosco's Academy Award® winning range of Cinegel color correction and diffusion filters that are cut to size for LitePad. |
|
Contains: 17 Filters: |
|
A selection of Rosco's OPTI-FLECS LED Enhancement Filters, which offers a range of 30 mil thick color correction and diffusion filters that are cut to size for LitePad. These thick filters are perfect for LitePad Axiom and Axiom 90 as their more ridged form-factor slides perfectly into the gel slot found on LitePad Axiom. |
|
Contains: 8 Filters; 1/4 CTO,1/2 CTO, 3/4 CTO, 1/4 Minusgreen, 1/2 Minusgreen, White Diffusion, Cosmetic Highlight, Cosmetic Rouge |
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs
